%%
%% This is file `skeleton.tex',
%% generated with the docstrip utility.
%%
%% The original source files were:
%%
%% nuthesis.dtx  (with options: `skeleton')
%% 

% rubber: module pdftex

%%
%% For common degrees, you can use the class options:
%% phd, edd, ms, ma
%% phd is the default
\documentclass[print]{nuthesis}

%%%%%%%%% Preamble from pandoc
\usepackage{lmodern}
\usepackage{amssymb,amsmath}
\usepackage{ifxetex,ifluatex}
\usepackage{fixltx2e} % provides \textsubscript
\usepackage[style=numeric]{biblatex}
\addbibresource{references.bib}

\usepackage{xcolor}

\ifnum 0\ifxetex 1\fi\ifluatex 1\fi=0 % if pdftex
  \usepackage[T1]{fontenc}
  \usepackage[utf8]{inputenc}
  \usepackage{textcomp} % provides euro and other symbols
\else % if luatex or xelatex
  \usepackage{unicode-math}
  \defaultfontfeatures{Ligatures=TeX,Scale=MatchLowercase}
\fi
% use upquote if available, for straight quotes in verbatim environments
\IfFileExists{upquote.sty}{\usepackage{upquote}}{}
% use microtype if available
\IfFileExists{microtype.sty}{%
\usepackage[]{microtype}
\UseMicrotypeSet[protrusion]{basicmath} % disable protrusion for tt fonts
}{}
\IfFileExists{parskip.sty}{%
\usepackage{parskip}
}{% else
\setlength{\parindent}{0pt}
\setlength{\parskip}{6pt plus 2pt minus 1pt}
}
\usepackage{hyperref}
\hypersetup{%
            pdfborder={0 0 0},
            breaklinks=true}
\urlstyle{same}  % don't use monospace font for urls
\usepackage{graphicx,grffile}
\makeatletter
\def\maxwidth{\ifdim\Gin@nat@width>\linewidth\linewidth\else\Gin@nat@width\fi}
\def\maxheight{\ifdim\Gin@nat@height>\textheight\textheight\else\Gin@nat@height\fi}
\makeatother
% Scale images if necessary, so that they will not overflow the page
% margins by default, and it is still possible to overwrite the defaults
% using explicit options in \includegraphics[width, height, ...]{}
\setkeys{Gin}{width=\maxwidth,height=\maxheight,keepaspectratio}
\setlength{\emergencystretch}{3em}  % prevent overfull lines
\providecommand{\tightlist}{%
  \setlength{\itemsep}{0pt}\setlength{\parskip}{0pt}}
\setcounter{secnumdepth}{0}
% Redefines (sub)paragraphs to behave more like sections
\ifx\paragraph\undefined\else
\let\oldparagraph\paragraph%
\renewcommand{\paragraph}[1]{\oldparagraph{#1}\mbox{}}
\fi
\ifx\subparagraph\undefined\else
\let\oldsubparagraph\subparagraph%
\renewcommand{\subparagraph}[1]{\oldsubparagraph{#1}\mbox{}}
\fi

% set default figure placement to htbp
\makeatletter
\def\fps@figure{htbp}
\makeatother

\makeatletter
\@ifpackageloaded{subfig}{}{\usepackage{subfig}}
\@ifpackageloaded{caption}{}{\usepackage{caption}}
\captionsetup[subfloat]{margin=0.5em}
\AtBeginDocument{%
\renewcommand*\figurename{Figure}
\renewcommand*\tablename{Table}
}
% \AtBeginDocument{%
% \renewcommand*\listfigurename{List of Figures}
% \renewcommand*\listtablename{List of Tables}
% }
\@ifpackageloaded{float}{}{\usepackage{float}}
\floatstyle{ruled}
\@ifundefined{c@chapter}{\newfloat{codelisting}{h}{lop}}{\newfloat{codelisting}{h}{lop}[chapter]}
\floatname{codelisting}{Listing}
\newcommand*\listoflistings{\listof{codelisting}{List of Listings}}
\makeatother

%%%%%%%%% End Preamble from pandoc

\begin{document}
%% Start formatting the first few special pages
%% frontmatter is needed to set the page numbering correctly
\frontmatter

\title{Measurement of the TTTT Cross Section at 13TeV}
\author{Caleb Fangmeier}
\adviser{Frank Golf}
\adviserAbstract{Professor Frank Golf}
\major{Physics and Astronomy}
\degreemonth{TBD}
\degreeyear{TBD}
%%
%% For most people the defaults will be correct, so they are commented
%% out. To manually set these, just uncomment and make the needed
%% changes.
%% \college{Your college}
%% \city{Your City}
%%
%% For most people the following can be changed with a class
%% option. To manually set these, just uncomment the following and
%% make the needed changes.
%% \doctype{Thesis or Dissertation}
%% \degree{Your degree}
%% \degreeabbreviation{Your degree abbr.}
%%
%% Now that we know everything we need, we can generate the title page
%% itself.
%%
\maketitle
%%
%% You have a maximum of 350 words for your abstract, which includes
%% your title, name, etc.
%%
%% Required
\begin{abstract}
\include{00_abstract}
\end{abstract}

%% Optional
%% \begin{copyrightpage}
%% \end{copyrightpage}

%% Optional
%% \begin{dedication}
%% \end{dedication}

%% Optional
%% \begin{acknowledgments}
%% \end{acknowledgments}

%% Optional
%% \begin{grantinfo}
%% \end{grantinfo}
%% The ToC is required
%% Uncomment these if need be

%% The ToC is required
\tableofcontents
%% Uncomment these if need be
% \listoffigures
% \listoftables
%%
%% ``Real'' beginning of the document.
%% mainmatter is needed to set the page numbering correctly
%%   mainmatter is needed after the ToC, (LoF, and LoT) to set the
%%   page numbering correctly for the main body
\mainmatter%

%% Thesis goes here

\include{01_introduction}
\include{02_standard_model}
\include{03_lhc_and_cms_detector}
\include{04_simulation_and_reconstruction}
\include{05_tttt_measurement}
\include{06_pixel_assembly}

%% backmatter is needed at the end of the main body of your thesis to
%% set up page numbering correctly for the remainder of the thesis
\backmatter%

%% Start the correct formatting for the appendices
\appendix

%% Appendices go here (if you have them)

%% Bibliography goes here (You better have one)
%% BibTeX is your friend
\printbibliography%

%% Index go here (if you have one)
\end{document}

\endinput
%%
%% End of file `skeleton.tex'.
